publications Archive
- 2024
-
Pore evolution mechanisms during directed energy deposition additive manufacturing
26/02/24
-
X1 Case Study C (UCL)
26/02/24
-
X1 Case Study B (UCL)
26/02/24
-
X1 Case Study A (UCL)
26/02/24
-
P2.3 Case Study B (Imperial)
26/02/24
-
P2.3 Case Study A (Imperial)
26/02/24
-
P2.2 Case Study (Manchester)
23/02/24
-
P2.2 Case Study (Oxford)
23/02/24
- 2022
-
In-Situ Alloying of CoCrFeNiX High Entropy Alloys by Selective Laser Melting
14/07/22
-
Publications in 2022 - from Sinter formation during directed energy deposition of titanium to Predictive Functional Control for Difficult Second-Order Dynamics with a Simple Pre-compensation Strategy.
28/06/22
-
A multi-laser approach with the potential to overcome traditional laser powder bed fusion processing challenges
07/06/22
-
Degradation of Laser Sintered polyamide 12 parts due to accelerated exposure to ultraviolet radiation.
05/05/22
-
Making our parts work harder – getting started with functional materials for 3D printing
05/04/22
-
Multi-faceted monitoring of powder flow rate variability in directed energy deposition
05/04/22
-
Paper - Enhanced near-infrared absorption for laser powder bed fusion using reduced graphene oxide
06/01/22
- 2021
-
A Tough Reversible Biomimetic Transparent Adhesive Tape with Pressure-Sensitive and Wet-Cleaning Properties
17/12/21
-
The UK Additive Manufacturing Landscape
01/08/21
-
Synchrotron X-ray imaging of directed energy deposition additive manufacturing of titanium alloy Ti-6242
06/07/21
-
New publications in February and March 2021
31/03/21
- 2020
-
A data-driven approach for predicting printability in metal additive manufacturing processes
02/12/20
-
Pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts
24/11/20
-
Characterisation and correlation of areal surface texture with processing parameters and porosity of High Speed Sintered parts
23/09/20
-
Shedding new light on laser powder bed fusion at ESRF – the European Synchrotron
26/08/20
-
Conformable green bodies: Plastic forming of robocasted advanced ceramics
25/08/20
-
MAPP colleagues featured in Nature Communications’ new additive manufacturing themed collection
19/08/20
-
Beat the machine (learning): metal additive manufacturing and closed loop control
16/07/20
-
Additive manufacturing (AM) of energy storage devices.
03/03/20
- 2019
-
High temperature strength of an ultra high temperature ceramic produced by additive manufacturing.
03/12/19
-
Benefits of adapting processing parameters during SLM builds
13/08/19
-
Powder Flow: Theory, Characterisation and Application
08/05/19
-
Additive manufacturing titanium components with isotropic or graded properties by hybrid electron beam melting/hot isostatic pressing powder processing
08/05/19
-
Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging
17/01/19
-
Thermal near infared monitoring system for electron beam melting with emissivity tracking
10/01/19
-
Graphene Oxide: An All-in-One Processing Additive for 3D Printing.
10/01/19
- 2018
-
3D printing a jet engine
27/06/18
-
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing.
02/05/18
- 2017
-
Diode area melting single-layer parametric analysis of 316L stainless steel powder
01/11/17
-
Laser diode area melting for high speed additive manufacturing of metallic components
30/10/17
-
3D Printing Bioinspired Ceramic Composites
06/10/17
-
Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing
05/09/17
-
Understanding the influence of porosity to help improve and predict fatigue life
04/08/17