Publications

Publications in 2022 - from Sinter formation during directed energy deposition of titanium to Predictive Functional Control for Difficult Second-Order Dynamics with a Simple Pre-compensation Strategy.

28 / 06 / 22

A multi-laser approach with the potential to overcome traditional laser powder bed fusion processing challenges

07 / 06 / 22

Degradation of Laser Sintered polyamide 12 parts due to accelerated exposure to ultraviolet radiation.

05 / 05 / 22

Making our parts work harder – getting started with functional materials for 3D printing

05 / 04 / 22

Multi-faceted monitoring of powder flow rate variability in directed energy deposition

05 / 04 / 22

Paper - Enhanced near-infrared absorption for laser powder bed fusion using reduced graphene oxide

06 / 01 / 22

A Tough Reversible Biomimetic Transparent Adhesive Tape with Pressure-Sensitive and Wet-Cleaning Properties

17 / 12 / 21

The UK Additive Manufacturing Landscape

01 / 08 / 21

A Data-Centric Review of AM Innovation and Entrepreneurship 2010-2020 based on Public Spending. 

Please refer to...

Synchrotron X-ray imaging of directed energy deposition additive manufacturing of titanium alloy Ti-6242

06 / 07 / 21

New publications in February and March 2021

31 / 03 / 21

A data-driven approach for predicting printability in metal additive manufacturing processes

02 / 12 / 20

Pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts

24 / 11 / 20

Characterisation and correlation of areal surface texture with processing parameters and porosity of High Speed Sintered parts

23 / 09 / 20

Shedding new light on laser powder bed fusion at ESRF – the European Synchrotron

26 / 08 / 20

Conformable green bodies: Plastic forming of robocasted advanced ceramics

25 / 08 / 20

MAPP colleagues featured in Nature Communications’ new additive manufacturing themed collection

19 / 08 / 20

Beat the machine (learning): metal additive manufacturing and closed loop control

16 / 07 / 20

Additive manufacturing (AM) of energy storage devices.

03 / 03 / 20

High temperature strength of an ultra high temperature ceramic produced by additive manufacturing.

03 / 12 / 19

Benefits of adapting processing parameters during SLM builds

13 / 08 / 19

Powder Flow: Theory, Characterisation and Application

08 / 05 / 19

Additive manufacturing titanium components with isotropic or graded properties by hybrid electron beam melting/hot isostatic pressing powder processing

08 / 05 / 19

Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging

17 / 01 / 19

Thermal near infared monitoring system for electron beam melting with emissivity tracking

10 / 01 / 19

Graphene Oxide: An All-in-One Processing Additive for 3D Printing.

10 / 01 / 19

3D printing a jet engine

27 / 06 / 18

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing.

02 / 05 / 18

Diode area melting single-layer parametric analysis of 316L stainless steel powder

01 / 11 / 17

Laser diode area melting for high speed additive manufacturing of metallic components

30 / 10 / 17